8ft CAT6a Ethernet Cable – 10 Gigabit Shielded Snagless RJ45 100W PoE Patch Cord – 10GbE STP Network Cable w/Strain Relief – Blue Fluke Tested/Wiring is UL Certified/TIA

Transfer files and access USB 3.2 Gen 2 devices faster, both inside and outside your computer case, with up to 10Gbps throughput

Fast, hassle-free setup, and natively supported by many operating systems

Fits into standard or low-profile systems, with its dual-profile design

Cost-effective backward compatibility

Compatible with high-powered USB devices, with an integrated SATA power connector

Compliant with UASP (USB Attached SCSI Protocol) Revision 1.0

Compliant with Universal Serial Bus 3.1 Specification Revision 1.0, and Universal Serial Bus Specification Revision 2.0

PCIe x4 interface compliant with PCI Express Base Specification Revision 3.0

Equipped with a full-profile bracket, includes a low-profile (half-height) bracket for installation in small form-factor computers

SKU: PEXUSB311EI

Cables, Micro USB Cables & Adapters

3 ft Micro USB Cable – A to Right Angle Micro B

Cables, Micro USB Cables & Adapters

3 ft Micro USB Cable – A to Right Angle Micro B

1x USB ‘A’ male connector

1x Right Angle USB Micro-B male connector

Supports high-speed data transfer rates of up to 480 Mbps

Aluminum-Mylar Foil with Braided Shielding

Molded connectors with strain relief

SKU: UUSBHAUB3RA

Cables, Drive Cables

6in SATA to Right Angle SATA Serial ATA Cable

Cables, Drive Cables

6in SATA to Right Angle SATA Serial ATA Cable

1x Right-angled/90-degree SATA connector

1x SATA connector

Supports full SATA 3.0 6Gbps bandwidth

Compatible with both 3.5″ and 2.5″ SATA hard drives

Provides 6″ in cable length

SKU: SATA6RA1

Cables, Lightning Cables

1 m (3 ft.) 2 in 1 Charging Cable – USB to Lightning or Micro-USB for iPhone / iPad / iPod / Android – Apple MFi Certified – Multi Phone Charger – USB 2.0

Cables, Lightning Cables

1 m (3 ft.) 2 in 1 Charging Cable – USB to Lightning or Micro-USB for iPhone / iPad / iPod / Android – Apple MFi Certified – Multi Phone Charger – USB 2.0

Reversible Lightning connector

Aluminum-mylar foil with braided shielding

Supports high-speed USB data transfer rates of up to 480 Mbps

12in LP4 to 2x Right Angle Latching SATA Power Y Cable Splitter – 4 Pin LP4 to Dual SATA

12in LP4 to 2x Right Angle Latching SATA Power Y Cable Splitter – 4 Pin LP4 to Dual SATA

2x Right-Angle Latching SATA Power Receptacles

1x LP4 power connector

Provides 12″ in cable length

SKU: PYO2LP4LSATR

Networking IO Products, USB and Thunderbolt Network Adapters

USB 2.0 to 10/100 Mbps Ethernet Network Adapter Dongle

Networking IO Products, USB and Thunderbolt Network Adapters

USB 2.0 to 10/100 Mbps Ethernet Network Adapter Dongle

10/100 Mbps Ethernet through USB 2.0

IEEE 802.3i and 802.3u (10BASE-T, 100BASE-TX) compatible

Supports half / full-duplex operation

Crossover Detection & Auto-Correction (Auto MDIX)

IEEE 802.1Q VLAN Tagging support

Dongle with integrated USB cable

CONNECTIVITY TOOLS: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities

SKU: USB2100

Server Management, Server-Racks

Horizontal 2U Server Rack Cable Management Finger Duct w/ Cover – 19″ Network Rack Wire Duct Raceway Panel – Slotted Wire Duct

Server Management, Server-Racks

Horizontal 2U Server Rack Cable Management Finger Duct w/ Cover – 19″ Network Rack Wire Duct Raceway Panel – Slotted Wire Duct

Finger duct plus rear pass-through holes for routing cables

Removable top cover

TAA compliant for GSA Schedule purchases

2U rack design

Sturdy steel construction

Mounts to standard 19″ 2 or 4-post server racks

Includes rack screws

SKU: CMDUCT2U

Cables

Dual-Port USB Wall Charger – International Travel – 17W/3.4A – Black

Cables

Dual-Port USB Wall Charger – International Travel – 17W/3.4A – Black

Universal Power Adapter (NA/UK/EU/AUS) included

Compact design

SKU: USB2PACBK

3ft (1m) Heavy Duty Power Cord, NEMA 5-15P to C19 AC Power Cord, 15A 125V, 14AWG, Computer Power Cord, Heavy Gauge Power Cable for PDUs and Network Equipment, NEMA 5-15P to IEC 60320 C19 Power Cord

3ft (1m) Heavy Duty Power Cord, NEMA 5-15P to C19 AC Power Cord, 15A 125V, 14AWG, Computer Power Cord, Heavy Gauge Power Cable for PDUs and Network Equipment, NEMA 5-15P to IEC 60320 C19 Power Cord

HEAVY DUTY AC POWER CORD: This 3ft (1m) 14AWG universal power cord with NEMA 5-15P and IEC 60320 C19 connectors is suitable for workstations/home office use | Rated to carry 125V at 15A

PERFORMANCE AND SAFETY: UL listed (UL62 & UL817) | Fully molded strain relief connectors for durability | Fire Rating: VW-1 | 3 Conductor Power Cable made with 100% Copper Wire | This C19 thick gauge computer power cord is available in other lengths

COMPATIBILITY: PC Power Cord NEMA 5-15P works with North American outlets | IEC C19 connector works with most servers and networking equipment | Replacement PC power supply cable/cord

THE IT PRO’S CHOICE: Designed and built for IT Professionals, this 3-prong power cable is backed for life, including free lifetime 24/5 multilingual technical assistance

SKU: PXT515C19143

Hard Drive Accessories, HDD Duplicators

Single Bay Hard Drive Eraser, Standalone HDD/SSD Sanitizer, USB 3.0 to SATA II (3 Gbps), 9 Erase Modes, LCD Display, Secure Erase Hard Disk Sanitizer Dock, DB-9 Printer Port, TAA Compliant

Hard Drive Accessories, HDD Duplicators

Single Bay Hard Drive Eraser, Standalone HDD/SSD Sanitizer, USB 3.0 to SATA II (3 Gbps), 9 Erase Modes, LCD Display, Secure Erase Hard Disk Sanitizer Dock, DB-9 Printer Port, TAA Compliant

STANDALONE HARD DRIVE ERASER: This single bay hard drive sanitizer/wiper features 9 erase modes, it works as a USB to SATA adapter, and it is capable of standalone disk erase; Hardware erasing tool

DRIVE COMPATIBILITY: Works with 2.5″/3.5″ SATA HDD/SSD drives of any capacity or file format; OS Independent; SATA II (3 Gbps); Compatible Drive Adapters: mSATA (SAT32MSAT257), SATA M.2 (SAT32M225) adapters sold separately

ERASE MODES: 9 erase modes including Quick Erase, Single/3/7 Pass Overwrite, Custom Erase, Secure & Enhanced Secure Erase (meets NIST SP 800-88 Rev 1 clear/purge); DB-9 (RS232) Printer Port; USB 3.2 Gen 1 (5 Gbps); Toolless Design; DoD / TAA Compliant

LCD MENU DISPLAY: Digital LCD Display with push button navigation for easy configuration and drive setup; Muti-function LEDs; Upgradeable firmware for future standards; Includes 3ft (0.9m) USB 3.2 (5 Gbps) Type-A cable and Universal Power Adapter

THE IT PRO’S CHOICE: Designed and built for IT Professionals, this standalone hard drive eraser is backed for 2 years, including free lifetime 24/5 multilingual technical assistance

SKU: SDOCK1EU3P

FSE-BP50

FSE-BP50

4 top buttons with individual level control

DETAILS

Beltpack

TFT color display

5 additional programmable buttons

Rotary controls on both sides and up/ down level controls

Master volume control on bottom

Mic and speaker mode

Built-in flashlight

Drop-in and USB-C charging

Connectivity

Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX cards

5 GHz radio frequency

20-27 radio channels (region specific)

Robust radio link works in high multipath or reflective environments

Dual redundant radios

2.4 Ghz radio; beltpack pairing and firmware updates over the air

Low latency audio: < 35ms (60ms beltpack to beltpack)

Wi-Fi coexistence

5 GHz Scanner Mode – built in scanning tool for selecting channels

AES256 shared key encryption

Mechanical

Curved shape fits to body

IP54 rating for wet and dusty conditions

SKU: FSE-BP50-X4 FSE-BP50-X5

USB Hubs

4 Port USB 3.0 Hub (SuperSpeed 5Gbps) with Fast Charge – Portable USB 3.2 Gen1 Type-A Laptop/Desktop Hub – USB Bus Power or Self Powered for High Performance – Mini/Compact

USB Hubs

4 Port USB 3.0 Hub (SuperSpeed 5Gbps) with Fast Charge – Portable USB 3.2 Gen1 Type-A Laptop/Desktop Hub – USB Bus Power or Self Powered for High Performance – Mini/Compact

PERFORMANCE: 4-port USB 3.2 Gen 1 hub (5Gbps) w/ 4x USB Type-A ports, incl. a BC 1.2 port for charging USB peripherals/devices; USB bus-powered or self-powered w/ incl power adapter for high performance

USB HUB WITH POWER ADAPTER: Provides 15W of shared power to support BC 1.2 fast charge (1.5A/7.5W) on 1x USB port and/or power high performance devices like HDD/SSD enclosures

SMALL FORM FACTOR: Compact/slim design w/ attached 5.9″ USB-A host cable requires minimal desktop space & fits easily in your laptop bag; ideal for small spaces and workstations in your home or office

FAST DATA TRANSFER: USB 3.2 Gen 1 hub w/ data transfer speeds up to 5Gbps SuperSpeed, connect multiple peripherals like data storage banks, USB-enabled SSDs & thumb drives

COMPATIBILITY: Mini hub is hot-pluggable and supports a driverless setup w/ any operating system incl Windows, macOS, Linux & Chrome OS; Backward compatible with USB 1.x and 2.0 (at reduced speeds)

SKU: ST4300MINI

Week Deals limited, Just now

Hurry up! Offer ends in:

Dual-Monitor Stand – Horizontal – Black – For up to 24″ (17.6lb/8kg) Displays

Dual-Monitor Stand – Horizontal – Black – For up to 24″ (17.6lb/8kg) Displays

Enhance productivity and free up space by mounting two monitors up to 24″

Dual-Monitor Mount | Low-Profile Base | Steel & Aluminum | For up to 24″ Monitors

Product ID: ARMBARDUO

Landscape-to-portrait display rotation (for use in portrait position, the mount supports ultrawide displays with max width of 26.3″/66.8 cm)

Free-standing monitor stand with crossbar design keeps monitors aligned

Easy height adjustment along the pole, and +/-15 degree tilt for customized viewing

Steel and aluminum stand supports VESA 75×75, 100×100, and a weight capacity of 18 lb. (8 kg) per monitor

Cubicle Monitor Mount – Cubicle Wall Single Monitor Hanger – Up to 34″ (17.6lb/8kg) VESA Mount Display – Height Adjustable Ergonomic Office Cubicle Hanging Flat Panel Hook & Clamp Bracket

Cubicle Monitor Mount – Cubicle Wall Single Monitor Hanger – Up to 34″ (17.6lb/8kg) VESA Mount Display – Height Adjustable Ergonomic Office Cubicle Hanging Flat Panel Hook & Clamp Bracket

34″ CUBICLE MONITOR MOUNT: VESA 75x75mm/100x100mm compatible single monitor cubicle wall hanger supports displays up to 34 inch (17.6lb/8kg); Silver powder coated finish; 3″ profile from cubicle wall

Cubicle-Wall Monitor Hanger | Height Adjustable | Steel | For up to 34″ Monitors

Product ID: ARMCBCLB

EASY MONITOR HEIGHT ADJUSTMENT: Total height adjustment range of 12.3″ from the top of the office cubicle; Easy-to-use height adjustment hand lever for toolless adjustability across 9 preset levels

DISPLAY RANGE OF MOTION: Ergonomic hanging cubicle monitor bracket increases comfort & productivity with +/-10° tilt & swivel, 360° screen rotation (landscape/portrait); Tension adjustments tools incl

EASE OF INSTALLATION: Features quick release detachable VESA plate; Mounting hardware incl. for compatibility; Adjustable clamp supports cubicle wall thickness ranging from 2.5″ (63mm) to 3.5″ (89mm)

SCALABLE SOLUTION: Create multi-monitor computer workstations by using several cubicle monitor hangers; Micro-adjustment allows for precise flat panel alignment; Cable management for organized setup

Cables, Thunderbolt Cables

2m Thunderbolt Cable – M/M

Cables, Thunderbolt Cables

2m Thunderbolt Cable – M/M

Connect your Thunderbolt™ devices

Product ID: TBOLTMM2M

Ethernet Switches, Networking IO Products

Industrial 6 Port Gigabit Ethernet Switch 4 PoE RJ45 +2 SFP Slots 30W PoE+ 48VDC 10/100/1000 Power Over Ethernet LAN Switch -40C to 75C with DIN Connector/Mountable

Ethernet Switches, Networking IO Products

Industrial 6 Port Gigabit Ethernet Switch 4 PoE RJ45 +2 SFP Slots 30W PoE+ 48VDC 10/100/1000 Power Over Ethernet LAN Switch -40C to 75C with DIN Connector/Mountable

FIBER & PoE: Industrial 6 Port Gigabit Ethernet Switch IEEE 802.3af (PoE) or 802.3at (PoE+) 30W max per 4 x PoE ports PSE + 2 x open SFP slots | Use with devices like cameras, sensors, wi-fi APs

Rugged Ethernet Switch | 5 RJ45 (4 PoE) | 2 SFP Slots | 30W PoE+ | 48V DC | DIN Rail Mountable

Product ID: IES1G52UPDIN

FLEXIBLE POWER INPUT: Use a DIN power connector or hardwire using terminal block power, or use dual power sources for redundancy | Input voltage range is 48-56V DC

ROBUST DESIGN: Industrial Network Switch w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged industrial IP-30 aluminum housing | -40C to 75C hardened operating temp | DIN/Wall Mount

TECH SPECS: 10/100/1000 Mbps Auto-Negotiation | Unmanaged | 6 Total Mixed Fiber/Copper Connections: 4 PoE ports + 1 SFP + 1 Flexible Copper or SFP port (MSA Compliant) | Total power budget: 120W

STARTECH.COM ADVANTAGE: IT professionals’ choice for over 30 years | This Gigabit PoE switch is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support

FSE-BP50

FSE-BP50

4 top buttons with individual level control

DETAILS

Beltpack

TFT color display

5 additional programmable buttons

Rotary controls on both sides and up/ down level controls

Master volume control on bottom

Mic and speaker mode

Built-in flashlight

Drop-in and USB-C charging

Connectivity

Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX cards

5 GHz radio frequency

20-27 radio channels (region specific)

Robust radio link works in high multipath or reflective environments

Dual redundant radios

2.4 Ghz radio; beltpack pairing and firmware updates over the air

Low latency audio: < 35ms (60ms beltpack to beltpack)

Wi-Fi coexistence

5 GHz Scanner Mode – built in scanning tool for selecting channels

AES256 shared key encryption

Mechanical

Curved shape fits to body

IP54 rating for wet and dusty conditions

SKU: FSE-BP50-X4 FSE-BP50-X5

BAT50 batteries, Battery Chargers

AC50

BAT50 batteries, Battery Chargers

AC50

The AC50 is a battery charger for the BAT50 batteries. The AC50 can charge up to four BAT50s simultaneously with additional reserve slots for four extra batteries. Red, Yellow and Green LED lights indicate whether the batteries are charging, the slot is empty or the batteries are fully charged, respectively. Charge time is 2.5 hours. The AC50 charges BAT50s, which are compatible with the DX100, DX121, DX210, DX340ES and DX410 digital wireless systems. BAT50 batteries can charge the DX410 system (BS410, BP410 and WH410). They can also charge the following wireless headsets: WH340, WH220, and WH301. Charges 4 batteries simultaneously Includes 4 additional battery storage slots LED status indicator lights Green LED status indicator light on top and bottom Charge time is 2 hours Charges AC50 batteries

SKU: CZ-AC50-US

Battery Chargers

CZ-BAT50

Battery Chargers

CZ-BAT50

Up to 20 hours of beltpack operation with each charge

BAT50s are compatible with the DX100, DX121, DX210, DX340ES and DX410 digital wireless systems. BAT50 batteries can charge the DX410 system (BS410, BP410 and WH410). They can also charge the following wireless headsets: WH340, WH220, and WH301.

For BP410 beltpacks and WH410, WH301 and WH220 all-in-one headsets

Charge time is 2.5 hours

SKU: CZ-BAT50

Headphone & In-Ear Audio Monitors, Studio Recording Equipment

CC-110-X4 | Single On Ear 4 Pin Female XLR Cardioid Headset

Headphone & In-Ear Audio Monitors, Studio Recording Equipment

CC-110-X4 | Single On Ear 4 Pin Female XLR Cardioid Headset

High quality dynamic cardioid microphone

Single-ear premium lightweight headset with cardioid dynamic microphones.

20Hz -20KHz frequency response

Choice of earpads: leatherette or foam

Flexible gooseneck microphone positioning

Boom rotation ON/OFF switch for quick microphone muting

Interchangeable cabling for easy connector change and repair

Fully serviceable headset

Rugged design

SKU: CC-110-X4

IP transceiver antenna

FSE-TCVR-50-IP-US FreeSpeak Edge Transceiver for 10 FSE-BP50 Beltpacks

IP transceiver antenna

FSE-TCVR-50-IP-US FreeSpeak Edge Transceiver for 10 FSE-BP50 Beltpacks

IP transceiver antenna, Networking IO Products, Uncategorized

The FSE-TCVR-50-IP is an active IP transceiver antenna for the FreeSpeak Edge wireless system. The transceiver delivers duplex communications from the Eclipse® HX matrix system via the E -IPA-HX interface card to the FreeSpeak Edge beltpacks. Each transceiver can support up to ten FSE-BP50 beltpacks. When supported with an E-IPA-HX card with 64 licensed ports, up to 64 FreeSpeak Edge beltpacks and 64 transceivers can be deployed with one Eclipse HX matrix system. The FreeSpeak Edge Digital Wireless RF Configuration Guide provides specifications, best practices and guidance for using the 5 GHz band and RF channels.

DETAILS

Transceiver

LED status indicators on top and bottom of transceiver

External omnidirectional antennas for the transceiver

Dual redundant radios per beltpack and transceiver

Separate radios for RF and radar scanning

Wall-mount plate

Microphone stand mounts (metric and imperial threads)

Tripod spigot mount

Connectivity

Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX cards

Supports 10 FreeSpeak Edge beltpacks per transceiver

Supports up to 64 transceivers and beltpacks per 64 port E-IPA-HX card and 200 beltpacks per Eclipse HX system

Robust radio link works in high multipath or reflective environments

Wi-Fi coexistence

Standalone mode for site survey and demo

AES256 shared key encryption

Dual network connections

etherCON RJ45 network connection

High speed SFP fiber cage

Power-over-Ethernet (PoE) up to 330ft (100m)

Daisy-chaining up to three locally powered transceivers

Mechanical

IP53 rating for wet and dusty conditions

SKU: FSE-TCVR-50-IP-US

FSE-BASE

FSEdge_Beauty_Base_Front_Straight_Optimized

IP transceiver antenna, Networking IO Products, Uncategorized

FSE-BASE

The FreeSpeak Edge Base Station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy 5 GHz transceivers and beltpacks, the base station also provides support to FreeSpeak II splitters, 1.9 GHz E1 and IP transceivers/beltpacks*, and 2.4 GHz E1 transceivers/beltpacks. The base station also provides multiple software-defined interoperable IP ports that support both Dante and third-party devices.

Please refer to the Clear-Com AoIP Network Recommendations guide for additional switch settings and network characteristics.

*Note: A 1.9 GHz beltpack cannot roam between and E1 1.9 GHz transceiver and an IP 1.9 GHz transceiver. Beltpacks on each system can communicate through the base station.

DETAILS

Capacity

Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)

Supports up to 100 channels

Base Station

Standard 1 rack unit (RU) device

High quality 12kHz audio to FS Edge beltpacks

2 large full-color touch screen TFT displays

4 rotary encoders for gain and menu operation

Headset connection

Stage Announce and Prog. Audio cable included

Functions as PTP Leader Clock

Connectivity

Wireless 5GHz Edge transceivers and beltpacks

Wireless 1.9GHz and 2.4GHz FSII splitters, transceivers and beltpacks

Dante enabled audio devices

AES67 devices via Dante controller

4-wire ports (8 ports RJ45)

2-wire ports (4 XLR-3F)

GPIO (D-type 9 pin)

LAN – 2 x RJ45, 2 x SFP

Configuration

CCM browser-based configuration tool

Direct management with encoders and display

SKU: FreeSpeak Edge Base Station

Cables, Ethernet Cable

8ft CAT6a Ethernet Cable – 10 Gigabit Shielded Snagless RJ45 100W PoE Patch Cord – 10GbE STP Network Cable w/Strain Relief – Black Fluke Tested/Wiring is UL Certified/TIA

Cables, Ethernet Cable

8ft CAT6a Ethernet Cable – 10 Gigabit Shielded Snagless RJ45 100W PoE Patch Cord – 10GbE STP Network Cable w/Strain Relief – Black Fluke Tested/Wiring is UL Certified/TIA

Cables, Ethernet Cable, Thunderbolt Cables

8ft CAT6a Ethernet Cable – 10 Gigabit Shielded Snagless RJ45 100W PoE Patch Cord – 10GbE STP Network Cable w/Strain Relief – Blue Fluke Tested/Wiring is UL Certified/TIA

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference

SKU: STAR-C6ASPAT8BK

9ft CAT6a Ethernet Cable – 10 Gigabit Shielded Snagless RJ45 100W PoE Patch Cord – 10GbE STP Network Cable w/Strain Relief – Aqua Fluke Tested/Wiring is UL Certified/TIA

Cables, Ethernet Cable, Thunderbolt Cables

9ft CAT6a Ethernet Cable – 10 Gigabit Shielded Snagless RJ45 100W PoE Patch Cord – 10GbE STP Network Cable w/Strain Relief – Aqua Fluke Tested/Wiring is UL Certified/TIA